https://www.downloads.netgear.com/files/GDC/M4200/M4200-M4300_SSM_EN.pdf
Console Settings
Baud rate. 115,200 bps
Data bits. 8
Parity. None
Stop bit. 1
Flow control. None
Default Login
Username: admin
Password:
The password is blank. Upon login it will ask you to set a new password.
Setting the Management IP
# Privilege mode
enable
# Disable DHCP on the service port
serviceport protocol none
# Set the IP address on the service port
serviceport ip ipaddress subnetmask gateway
# Save to startup config
save
# Show the serivce port IP
show serviceport
Set the Hostname
# Set the hostname
hostname namehere
Set the CLI Banner
# Set the CLI Banner
set clibanner line
* Banner text where ““ (double quote) is a delimiting character. The banner message can be up to
2000 characters. *
Set the NTP Server
# Set the NTP Server
sntp server ipaddress priority
Set the DNS Server
# Set the DNS Server
dns-server ipaddress
Change the Default Ports
ip http port 80
ip https port 443
ip ssh port 22
Create VLANs
# Privilege mode
enable
# Enter vlan database
vlan database
# add vlan 2
vlan 2
# Delete vlan 2
no vlan 2
# Name vlan 2
vlan name 2 namehere
# Tag all ports vlan 2
vlan tagging 2
# Set pvid all ports to vlan 2
vlan pvid 1
# Show vlans
show vlan
Change Switchport Modes and VLANs
# Disable Auto Trunking
no switchport mode auto
# Enter the interface
interface ethernet 1/1
# Change the Switchport mode to Trunk
switchport mode trunk
# Set the allowed vlans
switchport trunk allowed vlan 1-4093
# Set the native vlan for the trunk
switchport trunk native vlan 1
# Change the switchport mode to access
switchport mode access
# Set the access port vlan
switchport access vlan 3
# Show interfaces status
show interfaces status